Wimpey’s multifunctional scale remover uses an advanced chemical technologythat helps remove rust, corrosion, oxidation, heat and water scale from metal and concrete surfaces. It effectively penetrates water-wet, oil-wet deposits and willdissolve/disperse inorganic corrosion products of iron oxides, iron sulfides andpoly-sulfides as well as calcium and magnesium scales. This formula is non-hazardous without VOC content.
It is a 75 -80% aqueous solution of Tetrakis (Hydroxymethyl) PhosponiumSulfate ( THPS) in a proprietary aqueous solution of surfactants and corrosioninhibitor. It can dissolve iron sulfide and is biodegradable which can easilybe deactivated under controlled conditions. A dilution of less than 1ppm degradesimmediately to a non-toxic molecule. These properties make the product stand above the rest in a safer and environmental manner.
The scale inhibitor used to control primarily calcium sulfate, calciumcarbonate, barium sulfate, strontium sulfate and iron scales, and is a blend containingammonium salt of phosphonate and chelating agents. This is typically used inproduced formation waters with high total dissolved solids. An excellent inhibitor forwater disposal or seawater flood applications and is generally effective for all typesof oilfield scales. Scale crystals are prevented from forming due to this chemicalsability to distort and chelate scale forming elements.
This Product is a blend of proprietary asphaltene control chemicals and highly aromatic hydrocarbon solvent to effectively remove organic deposits that are comprised of asphaltenes and paraffins. It is used to clean the formation face in producing wells and remove organic deposits from down-hole equipment and flow lines.
It is a concentrated water-soluble hydrogen sulfide terminator designed tobe continuously applied to drilling or work over oil-based fluid systems or directly into flow lines fluid streams for removing hydrogen sulfide. The reaction productsusing H2S Terminator are soluble eliminating the need to remove deposits such aselemental sulfur from process equipment.
This is a water soluble biocide for use in the treatment of bacterial problems that can cause bio fouling and corrosion problems. It offers superior performance characteristics and are ideal for sewage water treatment. It controls corrosion caused by hydrogen sulfide forming bacteria and also it is highly effective on aerobic bacteria.
It is a water based heavy-duty super active colloidal cleaning compound used in soil remediation. It is a blend of fully biodegradable surfactants, alkaline builders, chelating agents and sequestrants. It is highly effective to decontaminate oil spills and to remove high concentrations of hydrocarbons and greases from contaminated soils to a safe levels for human health.
It is a concentrated water-soluble hydrogen sulfide terminator designed tobe continuously applied to drilling or work over oil-based fluid systems or directlyinto flow lines fluid streams for removing hydrogen sulfide. The reaction productsusing H2S Terminatorare soluble eliminating the need to remove deposits such aselemental sulfur from process equipment.
This is a water soluble biocide for use in the treatment of bacterial problems that can cause bio fouling, reservoir souring and corrosion problems in water injection systems and high water production wells. It controls corrosion caused by hydrogen sulfide forming bacteria and also remove iron sulfide build up in the production equipment, injection systems and boiler feed water for closed systems; effective on aerobic bacteria. It can also be used for the treatment of raw water for reinjection purpose.
The product is formulated for repairing damaged and defective gas pipelines, that issubjected to high internal pressure and a range of external and internal service temperatures. The grout allows rapid cure with sufficient working time overtemperatures ranging upto 45°C. They have exceptional toughness, good flow characteristics and negligible shrinkage.
It is a rapid setting polyester resin. It is an exceptional material for a widerange of bonding and scaling jobs for vertical or overhead fixing. It is also used toseal the ends of the pipeline jointing shells prior to the grouting of annular gap.
This is a specialty solvent that is used to clean all tools and equipment after application of Wimpey Pipeline Grout and Wimpey Putty. It can also be used to remove paint, stains and other similar substances from equipment cleaning.
Inadequate water treatment in cooling towers may result in scale formation,corrosion, accumulated rust and microbiological growth. This will lead in tounscheduled shutdowns, loss of production and increase in maintenance costs.
Our boiler water system products aims to maintain clean heat transfers surfaceswhich are essential for the systems integrity, workability and avoid scale formation orcorrosion attack.
Our products for chilled and hot water system are a combination of inhibitors tohandle all types of corrosion, fouling and bio-fouling.
